NACE-CIP1-001 Actual Questions Answers PDF 100% Cover Real Exam Questions
NACE-CIP1-001 Exam questions and answers
Becoming a NACE certified Coating Inspector Level 1 can boost the career of professionals by validating their knowledge and skills in the corrosion control process. Coating Inspector Level 1 certification can also qualify them for diverse job roles in the construction industry. Coating Inspector Level 1 certification can open doors for opportunities for professionals looking to enhance their career in the coating and lining industry.
You can find out about the exam cost of NACE CIP1-001 Certification.
The NACE CIP1-001 certification exam is affordable. It costs about $300.
NACE-CIP1-001 (Coating Inspector Level 1) Exam is a certification program designed to assess the knowledge and skills of individuals working in the field of coating inspection. NACE-CIP1-001 exam is administered by the National Association of Corrosion Engineers (NACE) and is recognized globally as a standard for the coating inspection industry. Coating Inspector Level 1 certification program is a rigorous process that tests the applicant's understanding of coating inspection fundamentals, including surface preparation, coating application, and post-application inspection.
NEW QUESTION # 10
NACE SP 0178 is a standard for:
- A. Tanks and Vessels to, be Lined for Immersion Service
- B. Tanks and Vessels to be Externally Coated
- C. Stainless steel pipe to be Externally Coated
- D. Structural steel to be coated for Atmospheric Service
Answer: A
NEW QUESTION # 11
Stripe coats are generally applied to:
- A. a), b), and c)
- B. Welds
- C. Edges and corners
- D. Complex geometric shapes
Answer: A
NEW QUESTION # 12
ISO ST 3 is described as:
- A. Thorough blast cleaning
- B. Very Thorough hand or power tool cleaning
- C. Thorough hand tool cleaning
- D. Very Thorough power tool cleaning
Answer: B
NEW QUESTION # 13
You are asked to be the only coating inspector on a small bridge recoating job where existing coating contains lead. The owners' representative has supplied you with the local code governing the removal and disposal of lead based coatings, however upon reading the document you having great deal of difficulty understanding the technical language.
As a NACE CIP Level 1 Inspector your preferred course of action is to:
- A. Advise the owners' representative of your lack of knowledge in this area
- B. Carefully review the document and do the best you can
- C. Hire a third patty to assist you in understanding the document
- D. Minimize your lack of understanding and go ahead with the inspection task to the best of your ability
Answer: B
NEW QUESTION # 14
To achieve consistently accurate results with ALL alt test equipment
- A. avoid placing the sample discs on a surface.
- B. wear gloves when sampling.
- C. wash your hands before sampling.
- D. calibrate the instrument in the field.
Answer: C
NEW QUESTION # 15
A magnetic pull-off type gauge is a good choice when:
- A. Performing an adhesion test
- B. Accuracy is not required
- C. When an intrinsically safe tool is required
- D. When working on non-ferrous metals
Answer: C
NEW QUESTION # 16
An exposed area of the substrate or previous coat of a conductive coating material, often caused by poor application technique is called
- A. cracking.
- B. checking.
- C. holiday.
- D. sagging.
Answer: C
NEW QUESTION # 17
You are the NACE Coating Inspector on an exterior job where the contractor is not using any environmental controls, For the last several hours your reading; indicate the relative humidity is rising and the substrate temperature is dropping. The sky is clouding over and the weather forecast is for evening showers. It is now 4 PM, your readings indicate you have minimally acceptable environmental conditions, however if the current trend continues, you expect to be outside specified conditions soon. The contractor advises you he is going to mix up the next full kit to complete his for the day.
Your FIRST preformed course of action is to:
- A. Advise the Contractor he can proceed
- B. Advise the Contractor he cannot proceed
- C. Call your supervisor
- D. Advise the Contractor of your readings
Answer: D
NEW QUESTION # 18
Stripe coats are best applied by:
- A. High volume low pressure spray
- B. Conventional spray
- C. Airless spray
- D. Brush
Answer: D
NEW QUESTION # 19
Dew point is the temperature at which
- A. water freezes.
- B. condensation occurs.
- C. humidity decreases
- D. the air is saturated.
Answer: B
NEW QUESTION # 20
What is the minimum spot measurement value allowed by SSPC-PA 2 in each 10 m2 (100 ft2) area?
- A. 100% of the specified maximum thickness
- B. 80% of the specified minimum thickness
- C. 70% of the specified maximum thickness
- D. 90% of the specified maximum thickness
Answer: B
NEW QUESTION # 21
If a Thermoset coating is heated it will:
- A. Harden and retain its hardness when cooled
- B. Soften when heated and retain its softness when cooled
- C. Harden and return to its original hardness when cooled
- D. Soften when heated and return to its original hardness when cooled
Answer: A
NEW QUESTION # 22
The main responsibilities of the inspector are to
- A. observe and direct the work of the contractors.
- B. demonstrate to the contractor how to apply the coating.
- C. direct and perform the work stated in the specification.
- D. observe and report the quality of the work performed.
Answer: D
NEW QUESTION # 23
Prior to using Inspection Tools the inspector must:
- A. Ensure the instrument is within calibration parameters
- B. Be trained on how to use the instrument
- C. Read the manufactures' instructions
- D. a), b) & c)
Answer: D
NEW QUESTION # 24
ISO SA 2 is defined as:
- A. Near White Metal Blasting
- B. Light Blast Cleaning
- C. Thorough Blast Cleaning
- D. Very Thorough Blast Cleaning
Answer: C
NEW QUESTION # 25
The Inspector should record the serial numbers of inspection instruments:
- A. Only if the specification requires it
- B. Only when verifying accuracy of the instrument
- C. Each time the instrument is used
- D. Only if the instrument is suspected of not working properly
Answer: C
NEW QUESTION # 26
Owners hire NACE Inspectors' with the expectation that:
- A. a) and c)
- B. The Inspector will improve job flow and schedule
- C. The inspection cost will be offset by an improvement in service life
- D. The Inspector will make a meaningful technical contribution to the job
Answer: A
NEW QUESTION # 27
How many gauge readings does SSPC-PA 2 require within a 4 cm (1.5 inch) diameter circle?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 28
Inspection documentation is important because:
- A. a) & b)
- B. It is the only deliverable item provided by the inspector
- C. Owners use the documentation for a variety of purposes
- D. a) only
Answer: C
NEW QUESTION # 29
When using a sling physchrometer a very large difference between the wet and dry bulb readings indicates:
- A. Low Surface Temperature
- B. High Relative Humidity
- C. High Surface Temperature
- D. Low Relative Humidity
Answer: D
NEW QUESTION # 30
An inspectors personal log book should contain:
- A. Subjective comments re ding the application team
- B. No comments regarding the application team
- C. Objective comments regarding the application work
- D. The inspector's personal opinions of the application team
Answer: B
NEW QUESTION # 31
As a NACE Coating Inspector your responsibility with respect to safety is to:
- A. Check the credentials of the Safety Officer on site
- B. Assume the role of the Safety Inspector
- C. Act in accordance with the site safety requirements and set an example
- D. Check the PPE used by the Applicators
Answer: C
NEW QUESTION # 32
Silicone coatings are typically:
- A. Applied in very thick films
- B. Applied in very' thin films
- C. Used as a sacrificial primer
- D. Used strictly in immersion service
Answer: B
NEW QUESTION # 33
......
PDFTorrent NACE-CIP1-001 Exam Practice Test Questions: https://exams4sure.pdftorrent.com/NACE-CIP1-001-latest-dumps.html